Bienvenue dans notre magasin! Sécurité à la maison. Maison / Jardin Meubles. 7000mW 2 Axes USB Laser Cutter Engraver DIY Machine D’Imprimante De Gravure EU. Fast and Precise Engraving. Ortur Laser Master is a portable laser engraving machine, which is easy to install and safe to operate. It has a built-in sensor accelerometer. When the machine tilts, it will automatically stop laser work and protect against laser damage. Support for GRBL open source software for operating fun. It supports dynamic control laser module, and PWM power regulation, low brightness regulation, laser temperature induction protection. It also supports lasers of different powers, so that this is a great device for DIY project. 32-bit Motherboard with STM32 chip, more powerful, faster, higher precision. Easy to adjust the speed (0-3,000mm / min) and power (S0-S1,000) for both of engraving and cutting. Active position protection, there is a G-sensor on the motherboard for active position protection. If the machine detects unauthorized movement, the laser beam will stop. Laser beam safety guard, if your computer system halted, led to that the laser engraver stop moving, the laser beam will stop. Exposure limitation, after the laser beam is turned on, but there is no movement for a long time, it will automatically stop. Weak Light Mode: the laser beam automatically stops after 100 seconds. None Weak Light Mode: based on the power level, the laser beam automatically stops within 10 to 60 seconds. LaserGRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. And then connect to the laser engraver via LaserGRBL for engraving and cutting. This laser engraver supports PWM mode. Pre-assembled parts, just need 5-10 minutes to install the machine. 160 x 150 mm engraving area. Aluminum profile + acrylic materials machine body. Image format: NC, DXF, BMP, JPG, PNG. Operating system: Win XP, Win 7, Win 8, Win 10. Image size: 2000 x 2000 pixels / 0.075mm dot pitch. Power adapter output voltage: 12V. 7W carving: wood, bamboo, cardboard, plastic, leather, PCB, aluminum oxide, paint finish metal. Please wear protective glasses when operating the machine. Please do not touch the laser emitter with your hand, or it may burn your hand. Please avoid strong impact on the machine. Children under 14 are not allowed to use this product and children over 14 need adult supervision. The light engraving machine cannot be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. This product is not recommended for industrial cutting due to its high engraving speed. 7W (Laser module laser input: 12V 0.75A). Power Adapter 12v 3A. Product size (L x W x H). 38.70 x 27.20 x 13.30 cm / 15.24 x 10.71 x 5.24 inches. Package size (L x W x H). 44.00 x 26.00 x 12.00 cm / 17.32 x 10.24 x 4.72 inches. 1 x Acrylic Plate for Testing, 4 x Wooden Plates for Testing, 1 x Wrench, 6 x Cable Ties, 1 x Power Adapter, 4 x Angle Fasteners, 1 x Whiteboard Marker, 1 x Brush, 4 x M5 Nuts & Washers, 2 x M3x16 Screws & 5MM Plastic Columns. Welcome to our Store! Goshopnow was established with a clear vision: to provide the very latest in fashion designs and technology for the Smartphone along with providing exceptional value, quality, and superb customer service. We offer a variety choice of Mobilephone. Our store is the source of joy and love. All products will be found in stylish design, fine polytechnic and well equipped. Our ultimate objective is that everyone enjoys the amazing changes brought by advanced technology. Customer is the only reason that we are here. Happy online Shopping, Thank you! We are not responsible for any wrong or undeliverable addresses. We stand behind every product we sell. Your better comments will be an encouragement for us to offer the better quality and the better service in future. We shall try our best to solve your problem to your satisfaction. L’item « 7000mW 2 Axes USB Laser Cutter Engraver DIY Machine D’Imprimante De Gravure EU » est en vente depuis le mardi 1 novembre 2016. Il est dans la catégorie « Art, antiquités\Art du XIXe et avant\Estampes, gravures, lithos ». Le vendeur est « goshopnow » et est localisé à/en Stains. Cet article peut être expédié au pays suivant: France.

• Type: Gravure
• Quantité unitaire: 1
• Marque: ORTUR
• Expédition: Code postal exclu 97000-98999
• Material: Aluminum + Acrylic
• Laser Wavelength(nm): 440nw-450nw
• Laser Reaching Range: 160 * 150mm

You may also like. This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. These issues are detailed and fully explained on the Mach3 Software website. This CNC 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby. It can work with various materials(metallic & non-metallic), such as: wood. Pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite. Like aluminum, copper and silver to engrave. Them into 3D/2D works etc. It can used for engraving: advertising signs, PCB, nameplates, badges. Seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double. PVC foaming board, indentation plates, signs, construction. Models, instrument panels, wooden products, etc. The mini CNC router Frame is movable. The machine can connect with computer. As other external device such as printer , scanner.. With the assist of the CNC ROUTER 6040T, your design idea will be real-time. X, Y, Z Working Area. 600(Y)390X120(Z)mm. X axis1605 Ball Screws. Y axis1605 Ball Screws. Z axis1605 Ball Screws. X axisHigh intensity Chromeplate shaft. Y axisHigh intensity Chromeplate shaft. Z axisHigh intensity Chromeplate shaft. Tips1, The spindle motor must connect with the VFD. 2, It cannot directly connect with the supply voltage (AC220V). 3, Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. 304 stainless steelCopper coilPressure cast aluminum pipe water jacket VOLTScurrentpower AC220V240V/50Hz5A, 0.8KW VFD. By adjusting the VFD output voltage and operating frequency. Lubricated by high grease. Radial beat acuities 0.03mm. G code / TAB files / nc file / NCC files. Through parallel connection with computer. Windows XP / win7. 0-2500mm/mindifferent materials differ. Friendly reminder: The engraver will come with MACH3 softwareFree Version. If you followed the intsalation tips offered by us, it works like full version. The software perferm better on the 32bites system computer. Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software. (This is very important). Otherwise, the antivirus will regards the cnc software is virus and stop the installation. Please don’t update the software when installed, then it will not need the license Numbers. Toroidal transformer + PWM power supply module + TB6560 stepping motor drive. Computer connectionon board palrallel port. 1, The NEW 0.8KW water-cooled VFD is available operating for long time, which. Can reinforced the processing abilty of the machine and can be used to. Process aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a 25pin parallel port output. Place the contral box in a ventilated dry place where there is no dust, no. Connecting the control box with the CNC machine and you computer and make. Sure the plug will not come off. Correctly connect the machine with the controller. Don’t suspended the. Cable which connect the Spindle motor with axis(X, Y, Z, A). Damage the driver of the controller. Correctly instal the Spindle motor and the heat pump. The heat pump should. Be covered completely in the water, then turned on the electric current to. Check whether the water-cooling system working well. Installing a CNC control software and Drive such as the MACH 3 or EMC2. Fllowing our manual or guideline to set uo the software. Before turn on the machine, please check all the cable and water- cooling. System to make sure they are working fine. You can enjoy making you dream with using our CNC machine now. Ces frais appartiennent à la responsabilité de l’acheteur. Veillez vérifier au bureau de douane de votre pays avant l’offre/l’achat pour savoir ce que les co? 5-8 jours ouvrables pour. Irlande, Autriche, Belgique, Danemark, Finlande, Portugal. Suède, Espagne, Grèce, etc. Gardez la boîte original ou le paquet dans 15 jours après avoir reçu le colis. L’article retourné doit avoir la boîte d’origine et l’emballage. Votre satisfaction est notre but ultime. Nous travaillons dur pour gagner votre confiance et l’affaire future. Nos techniciens certifiés ont examiné chaque article avant de les expédier. ASi vous recevez un article défectueux, vous pouvez le renvoyer ou demander un rabais. Veuillez nous contacter dans les 14 jours après que vous recevez le paquet. BCe que vous avez retourné doit être intact et dans son emballage original comme re? Le client est responsable pour le frais d’expédition de l’article retourné. CNous allons couvrir le co? T d’expédition de nouveau avec le taux d’expédition indiqué dans la page d’inscription. Nous vous ferons parvenir une nouvelle unité ou rembourserons le paiement intégral que vous avez payé. Nous maintenons des niveaux élevés d’excellence et essayons d’obtenir la satisfaction cent pour cent du client. La rétroaction est très importante pour nous. Nous espérons que vous nous contactez juste avant que vous donniez la rétroaction neutre ou négative, de sorte que nous pouvions répondre à vos préoccupations. Il est impossible de résoudre les problèmes si nous ne savons rien sur elles! Chers amis: Vous êtes les bienvenus à nous contacter Mes services sont disponibles: Du lundi au vendredi: 8:30 -17:00 (Heure Pékiné, Chine) 1. Mais dans heures non ouvrables, veuillez être patient et considérable de bien vouloir attedre nos réponse. Veuillez attendre notre réponse à votre courriel, nous ferons tout ce que nous pouvons faire pour vous aider à résoudre les problèmes. Le 06-juin-17 à 06:21:47 Paris, le vendeur a ajouté les informations suivantes. L’item « 4 AXES 1.5KW MACHINE À GRAVER 6040 Engraver CNC ROUTER DIY COUPEUR Tool » est en vente depuis le jeudi 4 juin 2015. Il est dans la catégorie « Art, antiquités\Art du XIXe et avant\Estampes, gravures, lithos ». Le vendeur est « fast-ship-item » et est localisé à/en Bayern. Cet article peut être livré partout dans le monde.

• Marque: Unbranded
• Numéro de pièce fabricant: Does not apply
• Acceptable software: Mach3,EMC2
• Computer connection: G code
• Operating Voltage: AC220V~240V
• Software environment: Windows XP
• EAN: Non applicable
• UPC: Non applicable
• Brand: – Sans marque/Générique -
• MPN: Non applicable